Tascam DP-02 Owner's Manual

Contents

IMPORTANT SAFETY INSTRUCTIONSTASCAM DP-02/DP-02CF 11 – Starting out with your DP-02/DP-02CFThis section explains the features of the DP-02 and DP-02CF.Features of the DP-02/DP-02CFTop panel1 ASSIGN (A,B) and ON/OFF keysThe ASSIGN (A,B) keys assign the input signalsthrough the INPUT A or B to the tracks (1 to 8). (See“Assigning inputs” on page 23.)The ON/OFF keys are used with the SHIFT key to turnthe INPUT (A,B) on or off. When the input is set to on,the indicator next to the key lights up. When off, theindicator is unlit.2 OL indicatorsThe indicator lights when the input signal is too high.3 LEVEL controlsUse this knob to adjust the INPUT (A,B) signal.4 PHANTOM keyThis key provides the phantom power (+48 V) to theXLR input jacks (INPUT A,B). The phantom power isnot supplied to the 1/4 phone jacks.5 INPUT MODE key and the indicatorsUse this key to select the MONO X 2 or STEREOmodes (see “The INPUT MODE key” on page 13 fordetails).6 EFFECT key / A B key (DP-02 only)Pressing the EFFECT key brings up the MULTIEFFECT screen.The A B key is used with the SHIFT key to select theinput signal (INPUT A or B) which the internal multi-effects is used with (see “Multi-effect” in chapter 4“DP-02 Appendix” on page 59). When INPUT A isselected, the indicator next to A letter lights up. WhenINPUT B is selected, the indicator next to B letter lightsup. When both indicators are unlit, neither of the inputsare not selected.7 PHONES controlAdjusts the headphone volume.8 MASTER / PLAY keyPressing MASTER key alone turns the master recordingmode on or off. When on, this key flashes.With the SHIFT key, PLAY (MASTER) key is used toturn on or off the master playback mode. When on, thiskey lights up (see “Mastering” on page 27).9 BOUNCE keyTurns Bounce mode on or off. When on, this key lightsup.