TASCAM DR-07MKII 47If you open or close the microphone pair whileusing the built-in stereo microphone and theleft-right channels does not suit the angle ofthe microphone, a pop-up message appearsto ask whether you want to swap the left-rightchannels of the microphone. (See “Microphoneposition detection” on page 49.)CAUTIONSet the left-right channels of the built-in microphone to•L-R. When you are using the built-in microphone and thesetting is not L-R, appears on the Home Screen. (See“Swapping the left-right channels of the built-inmicrophone pair” on page 48.)Setting the mics to record a clearstereo sound (X-Y position)Close the stereo microphone. (X-Y position)Set this way, the microphone pair is close, andrecording is possible with a clear stereo fieldwith less phase difference.If you open or close the microphone pair whileusing the built-in stereo microphone and theleft-right channels does not suit the angle ofthe microphone, a pop-up message appearsto ask whether you want to swap the left-rightchannels of the microphone. (See “Microphoneposition detection” on page 49.)3–Preparation
