TASCAM DR-22WL 3910 – Settings and InformationSystem Settings (SETUP)The SETUP page allows you to make various settings foroptimum use of the DR-22WL according to usage environmentand conditions, as well as resetting the unit and formatting themicroSD card.Follow the below steps to display the SETUP page.1. Press the /MENU/8 button to display the menu screen.2. Use the F1 button to display the SETUP page.Use the F2 button, the F3 button, and the F4button to make settings for different items.The following settings of different items can be made in theSETUP page.Auto power save function settingUse the AUTO PWR SAVE item to set the time for automaticturn-off, counting from the last operation.Options: OFF (no automatic turn-off ), 3min, 5min,10min, 30min (default value)Backlight settingUse the BACKLIGHT item to set the time for automaticturn-off of back-light in battery operation, counting from thelast operation.Options: OFF (light-off ), 5sec (default value), 10sec,15sec, 30secAdjusting the display contrastUse the CONTRAST item to adjust the display contrast.Options: 1 - 20 (default value: 2)Battery type settingsUse the BATTERY TYPE item to set the battery type. Thissetting is used to display the remaining battery power and tocalculate the minimum capacity for normal operation.Options: ALKAL (alkaline batteries, default value),Ni-MH (nickel-metal hydride batteries)Restoring the DR-22WL to factory settingsUse the INITIALIZE item to execute initialization; thiswill restore the unit to factory settings.1. Use the F2 and F3 buttons to select (highlight) theparameter of the INITIALIZE item and press the F4button.The following confirmation message will pop-up:2. Press the F3 button to execute initialization.Press the F2 button to cancel the process.Formatting the microSD cardUse the MEDIA FORMAT item to format the microSD card.Formatting will delete all music files in the microSD card, andthe “MUSIC” folder, the “UTILITY” folder, and the “dr-1.sys” will becreated automatically.1. Use the F2 and F3 buttons to select (highlight) theparameter of the MEDIA FORMAT item, and press theF4 button.The following confirmation message will pop-up:2. Press the F3 button to format the microSD card.Press the F2 button to cancel the process.CAUTIONWhen formatting the microSD card, make sure that theDR-22WL is connected to either the dedicated AC adapter(TASCAM PS-P515U; sold separately) or the USB bus powerfrom a computer, or operating on fully-charged batteries.Formatting may not complete successfully if the batteryruns out.