Tascam DR-680 Owner's Manual

Also see for DR-680: Comparison chart Owner's manual addendum Release notes Notice Owner's manual

Contents

Tascam DR-680 Owner's Manual Manual pdf 25 page image

TASCAM DR-680 254 Use the DATA wheel to select one of the followingoptions: 44.1kHz (default value), 48kHz, 96kHz,or 192kHz.NOTEWhen the file format is MP3, 96 kHz and 192 kHz cannotbe selected.5 Press the key to return to the selection ofitems on the REC screen.6 Press the MENU key to return to the MENU screen.Press the HOME/FUNC key to return to the HomeScreen.Setting the file recording modeThe file recording mode can be set to a monaural file, astereo file or a 6-channel file.1 Press the MENU key to open the MENU screen.2 Use the DATA wheel to select the REC menu item,and press the ENTER key to open the REC screen.3 Use the DATA wheel to select the FILE item, andpress the key or ENTER key.4 Use the DATA wheel to select one of the followingoptions: MONO, STEREO (default value), or 6ch.NOTEWhen set to MONO, a mono file is created for each•recorded track. When set to STEREO, a stereo fileis created for each pair of tracks (1-2, 3-4 and 5-6).When set to 6ch, one 6-channel file is created fortracks 1-6.6ch cannot be selected when the file format is set to•MP3 or the sampling frequency is set to 192 kHz.5 Press the key to return to the selection ofitems on the REC screen.6 Press the MENU key to return to the MENU screen.Press the HOME/FUNC key to return to the HomeScreen.Stereo track recording settingsYou can set what is recorded on the stereo track.1 Press the MENU key to open the MENU screen.2 Use the DATA wheel to select the REC menu item,and press the ENTER key to open the REC screen.3 Use the DATA wheel to select the ST REC item, andpress the key or ENTER key.4 Use the DATA wheel to select one of the followingoptions.MIX (default): Record a mix of the 6 inputs on thestereo track.DIN : Record the signal from the DIGITAL/SYNC IN input jack on the stereotrack.5 Press the key to return to the selection ofitems on the REC screen.6 Press the MENU key to return to the MENU screen.Press the HOME/FUNC key to return to the HomeScreen.Creation of new takes when restartingrecordingSet whether the unit continues recording to the sametake or begins a new take when restarting recording.This setting determines the take recorded to whenyou press the REC key again after having pressed thePAUSE key to put the unit in recording standby.1 Press the MENU key to open the MENU screen.2 Use the DATA wheel to select the REC menu item,and press the ENTER key to open the REC screen.3 Use the DATA wheel to select the PAUSE item, andpress the key or ENTER key.4 – Recording