Tascam DR-70D Owner's Manual

Also see for DR-70D: Reference manual Release notes

Contents

Tascam DR-70D Owner's Manual Manual pdf 13 page image

TASCAM DR-70D 136 Phantom power statusNo icon: Phantom power off: Phantom power on7 Recording status: Recording off: Recording on8 Project nameThis shows the name of the project for therecorded files.9 Remaining recording timeThe remaining recording time on the SD card isshown in hours: minutes: seconds according tothe recording mode, sampling frequency andrecording format settings.0 Low cut filter on/off status: Low cut filter off: Low cut filter onq Limiter function status: Limiter off: Limiter onw HOLD switch status: HOLD switch off: HOLD switch one Peak value in decibels (dB)Peak input level values are shown in decibels.Menu structureVarious settings can be made using the BASIC itemof the MENU screen.BASICRECORD Recording settingOFF, ONPAN Set the left-right balance(applied to stereo files during2MIX recording and tomonitoring output)LEFT 12 − CENTER − RIGHT12GAIN Set the input gainLOW, HIGH, HI+PLUSINPUT 1/2 Set for the channel 1 and 2input connectorsEXT_STEREO, EXT_POWER,XLR/TRSINPUT 3/4 Set for the channel 3 and 4input connectorsMIC, XLR/TRSSetting input destinations1. Connect external mics to the EXT IN 1/2 or 1/L,2/R, 3/L and 4/R jacks.2. Press the MENU button to open the MENUScreen.3. Turn the DATA dial to select BASIC, and pressthe DATA dial.The BASIC screen opens.CH1 BASIC screen4. Turn the DATA dial to select INPUT 1/2orINPUT 3/4, and press the DATA dial.5. Turn the DATA dial to select the input desti-nation.OptionsINPUT 1/2: EXT_STEREO (default), EXT_POWER, XLR/TRSINPUT 3/4: MIC (default), XLR/TRS6. When finished, press the MENU button toreturn to the Home Screen.