Tascam FE-8 Owner's Manual
Also see for FE-8: Frequently asked questionsBrochureManual
            |
4 TASCAM FE-8 Owner’s ManualTO THE USERThis equipment has been tested and found tocomply with the limits for a Class A digital device,pursuant to Part 15 of the FCC Rules. Theselimits are designed to provide reasonableprotection against harmful interference when theequipment is operated in a commercialenvironment. This equipment generates, uses,and can radiate radio frequency energy and, ifnot installed and used in accordance with theinstruction manual, may cause harmfulinterference to radio communications.Operation of this equipment in a residental areais likely to cause harmful interference in whichcase the user will be required to correct theinterference at his own expense.CAUTIONChanges or modifications to this equipment notexpressly approved by TEAC CORPORATIONfor compliance could void the user’s authority tooperate this equipment.For the consumers in EuropeWARNINGThis is a Class A product. In a domestic environment,this product may cause radio interference in whichcase the user may be required to take adequatemeasures.Pour les utilisateurs en EuropeAVERTISSEMENTIl s’agit d’un produit de Classe A. Dans un environne-ment domestique, cet appareil peut provoquer des in-terférences radio, dans ce cas l’utilisateur peut êtreamené à prendre des mesures appropriées.Für Kunden in EuropaWarnungDies is eine Einrichtung, welche die Funk-Entstörungnach Klasse A besitzt. Diese Einrichtung kann imWohnbereich Funkstörungen versursachen ; in die-sem Fall kann vom Betrieber verlang werden, ange-messene Maßnahmen durchzuführen und dafüraufzukommen.For U.S.AIMPORTANT SAFETY PRECAUTIONSIMPORTANT (for U.K. Customers)DO NOT cut off the mains plug from this equipment.If the plug fitted is not suitable for the power points in your homeor the cable is too short to reach a power point, then obtain anappropriate safety approved extension lead or consult your dealer.If nonetheless the mains plug is cut off, remove the fuse anddispose of the plug immediately, to avoid a possible shock hazardby inadvertent connection to the mains supply.If this product is not provided with a mains plug, or one has to befitted, then follow the instructions given below:IMPORTANT: The wires in this mains lead are coloured inaccordance with the following code:GREEN-AND-YELLOW : EARTHBLUE : NEUTRALBROWN : LIVEWARNING: This apparatus must be earthed.As the colours of the wires in the mains lead of this apparatus maynot correspond with the coloured markings identifying theterminals in your plug proceed as follows:The wire which is coloured GREEN-and-YELLOW must beconnected to the terminal in the plug which is marked by the letterE or by the safety earth symbol ç or coloured GREEN orGREEN-and-YELLOW.The wire which is coloured BLUE must be connected to theterminal which is marked with the letter N or coloured BLACK.The wire which is coloured BROWN must be connected to theterminal which is marked with the letter L or coloured RED.When replacing the fuse only a correctly rated approved typeshould be used and be sure to re-fit the fuse cover.IF IN DOUBT — CONSULT A COMPETENT ELECTRICIAN. |
Related manuals for Tascam FE-8
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine