Tascam HD-R1 Owner's Manual

Also see for HD-R1: Technical information Specifications Quick start guide Technical information Owner's manual addendum

16 TASCAM HD-R13–Screens and Menusprevious character. When finished setting the name,press the SKIP ≤ key to select SAVE. Press theENTER key to confirm the name setting and return tothe Record Settings Menu.Press the CANCEL key to cancel the name setting andreturn to the Record Settings Menu and retain theprevious setting for the File Base Name.Mark Base NameNew Marker names will start with these characters.New markers are given names by adding a three-digitnumber to the end of this base name.If you select this item, a screen opens to allow editingof the base name. Use the SHUTTLE/DATA wheel tochange the selected character in the name box. Pressthe ENTER key to confirm a character setting andselect the next character to the right. Press the SKIPμ key to select the next character to the left andclear the previous character. When finished setting thebase name, press the SKIP ≤ key to select SAVE.Press the ENTER key to confirm the base name settingand return to the Record Settings Menu.Press the CANCEL key to cancel the name setting andreturn to the Record Settings Menu and retain theprevious setting for the Mark Base Name.WAVE Settings SubmenuWAVE Sample Rate44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz.Sets the sample rate to use when recording. If theinput source is S/PDIF and the incoming signal doesnot match this sample rate setting, the HD-R1 will beunable to enter record and will display an error.Sample Width16 Bits or 24 Bits. Sets the number of bits persample when recording Broadcast WAV files.MP3 Settings SubmenuMP3 Sample Rate44.1 kHz, 48 kHz. Sets the sample rate to usewhen recording. If the input source is S/PDIF andthe incoming signal does not match this sample ratesetting, the HD-R1 will be unable to start recordingand will display an error.Stereo Bit Rate64 kbps, 80 kbps, 96 kbps, 112 kbps,128 kbps, 160 kbps, 192 kbps, 224kbps, 256 kbps, 320 kbps. Determines thebit rate to be used when recording stereo MP3 files.Mono Bit Rate32 kbps, 40 kbps, 64 kbps, 80 kbps, 96kbps, 112 kbps, 128 kbps, 160 kbps.Determines the bit rate to be used when recordingmonaural MP3 files.System settingsThe System Settings menu controls overallsettings, information, and tools related to the HD-R1system as a whole.NOTESimultaneously pressing SHIFT+TIME keys is a shortcut tothe System Settings.DuckingLeads to a submenu containing all ducking-relatedsettings.MeteringLeads to a submenu containing all settings pertainingto audio meters.NetworkLeads to a submenu containing all settings that pertainto the LAN Ethernet port.Parallel PortLeads to a submenu containing all parallel portsettings.ResumeOff or On. When ON, the unit remembers the trackand position where it was last playing and it willcontinue from this point the next time playback isstarted. The transport position will be preserved evenif the unit has been powered down or the card hasbeen ejected.Shuttle ModeThe SHUTTLE/DATA wheel always locates to trackstart points and markers. It can additionally locate totime intervals specified here. Choices are: Tracks