Tascam LM-8ST Owner's Manual

Contents

4 TASCAM LM-8STThank you for your purchase of the TASCAM LM-8STLine Mixer.Before connecting and using the unit, please take timeto read this manual thoroughly to ensure you understandhow to properly set up and connect the unit, as well as theoperation of its many useful and convenient functions. Afteryou have finished reading this manual, please keep it in asafe place for future reference.You can also download the Owner's Manual from theTASCAM web site (http://www.tascam.com).FeaturesRack-mountable 1U size•8 stereo line inputs, 2 stereo bus outputs•Each channel has balanced TRS input jacks•Channel 1 has an XLR microphone input connector and• a trim knobNominal input level can be switched between +4 dB and• –10 dBVEach input has overload and signal indicators•Each output bus has a 4-segment output level meter•1/4-inch (6.3-mm) and 1/8-inch (3.5-mm) headphone• output connectorsGround lift switch allows signal grounding to be turned• ON or OFF for all channels at the same timeIncluded itemsThe included items are listed below.Take care when opening the package not to damage theitems. Keep the package materials for transportation in thefuture.Please contact the store where you purchased this unit ifany of these items are missing or have been damaged dur-ing transportation.Main unit (LM-8ST)• .......................................................1Power cord• .......................................................................1A rack-mounting screw kit• ..............................................1A warranty card• ..............................................................1Owner's manual (this manual)• ........................................1About this manualIn this manual, we use the following conventions:The names of keys and controls are given in the follow-• ing typeface: POWER.Additional information is introduced in the styles below• when needed:1 − IntroductionNOTEExplanation of actions in special situation andsupplement.CAUTIONInstructions that should be followed to avoid injury,damage to the unit or other equipment.TrademarksTASCAM is a trademark of TEAC Corporation, regis-• tered in the U.S. and other countries.Other company names, product names and logos in this•document are the trademarks or registered trademarks oftheir respective owners.Precautions and notes for placementand useThe operating temperature should be between 5°C and• 35°C (41°F and 95°F).Make sure that the unit is mounted in a level position for• correct operation.Do not place any object on the unit for heat dissipation.•Avoid installing this unit on top of any heat-generating• electrical device such as a power amplifier.Cleaning the unitTo clean the unit, wipe it gently with a soft dry cloth. Donot wipe with chemical cleaning cloths, benzene, paintthinner, ethyl alcohol or other chemical agents to clean theunit as they could damage the surface.