Tascam MX-2424 Install Manual

Also see for MX-2424: Release note Instructions Manual update Quick reference guide Optional Hardware Installation Guide

Installing The MX-2424When mounting MX-2424's on top of each other in a rackthe feet may be removed by unscrewing them.To replace the feet:1. Insert the fastener into the foot2. Snap the fastener & foot back into the hole in the bottom of the MX-2424 chassis3. Snap the screw into the fastener's holeMultiple units can be mounted on top of each other when forced air rack ventilation is provided.a one inch clearance is required on both sides of the MX-2424 (even in single-unit installations).In facilities with raised computer-room style flooring, a ventilation opening in the floor is recom-mended. In no case should the internal rack temperature ever exceed 100 degrees Fahrenheit(43 degrees Centigrade) during operation (as measured at the rear of any MX-2424 in the system).

/ 5

Related manuals for Tascam MX-2424