6 − Recording TASCAM SS-R1If DD is selectedAs when LEVEL is selected, use the DELAY item tospecify the time from when a signal exceeding theauto track level is detected until the new track num-ber is assigned, in steps of one frame (one frame is1/75 of a second).If TIME is selectedUse the INTERVAL item to specify the time intervalat which the track number is assigned, in a range of 1–10 seconds (one-second steps).••7 When you’ve finished making settings, press thefront panel TIME (ESC) key (or the remote’sCLR/ESC key) to return to the home screen.NOTEThis setting is remembered even when you turn offthe power.Using the remote’s dedicated key to switch modesEach time you press the remote’s A.TRACK key, the AutoTrack function mode will cycle in the order of OFF ∑LEVEL ∑ DD ∑ TIME.Assigning a new track number manuallyYou can assign a new track number manually by pressingthe RECORD key during recording.However, you cannot create a track that is shorter than fourseconds.NOTEIf you recorded in WAV format, you can use the edit-ing functions to divide or join tracks after they havebeen recorded (see “Operations in the file menuscreen” on page 50).
