Tascam Sonicview 16 Owner's Manual

Also see for 24: Owner's manual Manual Manual Reference manual Reference manual

Restoring default settingsTo restore all settings, including signal processing and routing,to their default values, use the and buttons at the top ofthe Menu Screen to select “P001 Initial Data”, and tap the RECALLbutton.Input RoutingTo check and change input channel routing settings, tap theInput area at the top of the Home Screen for a Channel 1–40 orST IN 1-2 module (a area in “Setting various parameters on theHome Screen” on page 13) to show the selection frame. Then,tap the selection frame again to open the MODULE (INPUT)Screen.Output RoutingTo check and change output connector routing settings, tapthe Output Area at the top of the Home Screen for a MIX 1–22module (a area in “Setting various parameters on the HomeScreen” on page 13) to open the MODULE (OUTPUT) Screen.To check and change MAIN L/R output connector routingsettings, press the MASTER section SEL key (y) to open theMAIN L/R master MODULE Screen. Then, tap the OUTPUT screenselection button at the top of the screen to open the MODULE(OUTPUT) screen.Direct Out RoutingTo check and change Direct Out routing settings, tap a channel1–40 NAME area on the Home Screen (e area in “Setting variousparameters on the Home Screen” on page 13) to open theMODULE (OVERVIEW) Screen. Then, tap the OUTPUT buttonabove the DIRECT OUT TRIM volume area to open the DIRECTOUT PORT SELECT screen.FunctionsLayersChannel sets and custom layers can be assigned and arrangedfreely in seven layers. Different modules can be opened easilyusing the LAYER KEYS.Change settings for the LAYER KEYS (p) on the Layer Key Setupscreen. Open this using Menu Screen > Front Panel Setup menu> Layer / Master Fader Setup item.Default settings for LAYER KEYS 1–7Sonicview 16 settingsKey Assigned functionLAYER KEYS 1 CH 1-16LAYER KEYS 2 CH 17-32LAYER KEYS 3 CH 33-40 / ST IN / FX RTNLAYER KEYS 4 MIX 1-16LAYER KEYS 5 MIX 17-22 / MAIN L/RLAYER KEYS 6 DCALAYER KEYS 7 CUSTOM 2Sonicview 24 settingsKey Assigned functionLAYER KEYS 1 CH 1-24LAYER KEYS 2 CH 25-40 / ST IN / FX RTNLAYER KEYS 3 MIX 1-22 / MAIN L/RLAYER KEYS 4 DCALAYER KEYS 5 CUSTOM 1LAYER KEYS 6 CUSTOM 2LAYER KEYS 7 CUSTOM 3TASCAM Sonicview 16/Sonicview 24 15ENGLISH