Tascam US-1641 Owner's Manual

Also see for US-1641: Release notes

Tascam US-1641 Owner's Manual Manual pdf 20 page image

IMPORTANT SAFETY PRECAUTIONS0 TASCAM US-16410 TASCAM US-1641This chapter explains basic operations for using the US-1641with Cubase LE 4.This explanation is not intended to replace the user’s manualfor Cubase LE 4. For more information on Cubase LE 4,please refer to the Cubase LE 4 user’s manual.Input settingStart Cubase LE 4. From the Devices menu, chooseDevice Setup.The system displays the Device Setup window.In the VST Audio System section in the right side ofthe Device Setup window, select US1641 for ASIODriver.From the Devices menu, choose VST Connection.The system displays the VST Connections window,which features two tabs: Input and Output.Select the Inputs tab, then set the input bus.When you set the input bus, a device port is auto-matically selected. If necessary, you can change thedevice port. The device port pull-down list indicatesall available input ports for the US-1641.1�2�3�4�Select the Outputs tab, then set the output bus.When you set the output bus, a device port is auto-matically selected. If necessary, you can change thedevice port. The device port pull-down list indicatesall available output ports for the US-1641.From the File menu, choose New Project.The system displays a window that enables you toselect a template for your new project. Select thedesired template and press the OK button. Thesystem displays the Select directly window. Specifythe directory in which you wish to save the project,then click the OK button. The new project will becreated.NOTEIf you have selected an Empty template, add audiotracks to the project by selecting Add Tracks fromthe Project menu.You are now ready to begin recording.5�6�6 – Recording with Cubase LE 4