TASCAM US-200 15ROM. The TASCAM_US200_1.00.mpkg" iscreated on the desktop.3 Dboule-click the TASCAM_US200_1.00.mpkg on the desktop to launch theinstaller.4 Follow the instructions on the screen toconduct the installation.5 Restart the computer and then connectthe unit.Uninstalling the driverWindowsªThere are two ways to uninstall the driver asshown below.Using the Installation CD-ROM:1 Follow steps 1 to 4 under “Installing thedriver and control panel for Windows”(See page 13.)2 At step 5 of the procedure, click Removethe driver.3 Follow the instructions on the screenfor the remaining procedure.Using Windows “Add or Remove Programs”1 Open the Control Panel from the Startmenu.2 Double click on Add or Remove programs.3 Select US-200 driver from the list andclick Change or Remove Programs.4 Follow the instructions on the screenfor the remaining procedure.Mac OS Xª1 Insert the CD-ROM into the computer,open TASCAM_US200_Driver_1.00.dmgand double click TASCAM US-200 removericon.2 Follow the instructions on the screenfor the remaining procedure.Frequently asked installationquestions and answers (FAQ)Windows driver installationQ: When I connect the unit to a computer,the Windows Hardware Wizard appearsand I cannot install the driver. Am Imaking a mistake during the installationprocedures?A: Close the Windows “Hardware Wizard” anddisconnect the unit. You must install thedriver before connecting this unit. Insertthe CD-ROM included with the product.The menu for installing the driver appearsautomatically.Select Install Driver, and follow theinstructions shown on the screen. If youhave downloaded the driver from theTASCAM website (htt://tascam.com/),expand the ZIP archive, launch the setup.exe file, and follow the instructions on thescreen.Q: I loaded the installation CD-ROM intoa Windows computer, but the driverinstallation menu does not appear. Howcan I access this menu?A: The automatic playback settings for thedisc drive might be disabled.3 − Installation