Tascam US-600 Owner's Manual

Also see for US-600: Quick start guide

Tascam US-600 Owner's Manual Manual pdf 11 page image

TASCAM US-600 11Rear panelq MIC/LINE IN 3/4 (balanced) connectorsUse these connectors as balanced analogXLR microphone inputs or as standardTRS balanced analog input jacks.XLR (1: GND, 2: HOT, 3: COLD)•TRS (Tip: HOT, Ring: COLD, Sleeve: GND)•w LINE OUT 1/2 (unbalanced) jacksThese RCA pin jacks are unbalancedanalog line outputs.These jacks can output signals sentfrom the computer via USB, signalsfrom the built-in monitoring mixer ora combination of both. Use the US-600software control panel on the computerto set which signals are output. Connectthese jacks to recorders, speakers withbuilt-in amplification and external effectdevices, for example.NOTEThe• LINE OUT 1/2 jacks can output theanalog signals input through the unit.The• LEVEL knob, which also controls theheadphone output, can be used to adjustthe output level of the LINE OUT 1/2jacks.e DIGITAL IN (coaxial) jackThis coaxial digital input is compliantwith IEC 60958-3 (S/PDIF) standards.NOTEWhen using this unit’s digital input, theconnected device must become the clockmaster. For details, see “Sound module/MD/CD etc. (digital connection)” on page 23.r MIDI IN connectorThis 5-PIN DIN is a standard MIDI inputconnector for inputting MIDI signals.t MIDI OUT connectorThis 5-PIN DIN is a standard MIDI outputconnector for outputting MIDI signals.y PHANTOM (+48V) switchUse this to turn +48V phantom power onfor mic input connectors 1-4.CAUTIONAlways set the• PHANTOM (+48V) switchto OFF before turning the unit’s power onor off (connecting or disconnecting the ACadaptor).Always turn the• LEVEL knob to theminimum volume before changing theswitch between ON and OFF. Dependingon the connected microphone, loud noisesmight be produced and damage could becaused to equipment and people’s hearing.2 − Names and Functions of Parts