Tascam iXR Reference Manual

Also see for iXR: Owner's manual

TASCAM iXR 73 – InstallationInstalling the Windows driverCAUTION• Complete installation of the Windows driver on thecomputer before connecting the unit to it with the USBcable.• If you already connected the unit to the computer usingthe USB cable before installing the Windows driver and theFound New Hardware Wizard launched, close the messageand disconnect the USB cable.8 Windows driver installation procedures1. Download the latest Windows driver for the operatingsystem you are using from the TEAC Global Site (http://teac-global.com/) and save it on the computer to be usedwith the unit.2. Open the saved Windows driver (zip file) on the computerdesktop or another location.3. Double-click the “iXR_Installer_XXX.exe” (XXX is the versionnumber), file in the folder that appears after uncompressionto automatically launch the installation software.CAUTIONIf you open a zip file without decompressing it and double-click the “exe” file in the folder that opens, installation willnot start. Right-click the zip file and select “Extract All”, forexample, to uncompress it and then try again.4. When a “Security Warning” or “User Account Control” screenappears, click the “Run” or “Yes” button.5. When the Setup Wizard screen appears, click the “Next”button.6. Read the contents of the License Agreement, and select “Iaccept the agreement” if you agree to the terms. Then, clickthe “Next” button.7. Next, click the “Install” button to start installation.8. A Windows security screen will appear twice. Click the“Install” button to proceed with installation.9. The following screen appears when installation hascompleted.Click the “Finish” button.NOTEAfter installing the driver, the device driver will be installedthe first time the unit is connected by USB.At this time, Windows will automatically search WindowsUpdate, and it may take some time to recognize the unitconnection.If the unit is still not recognized after some time, open thesoftware installation screen from the message area atthe bottom right of the computer display, and click “SkipObtaining Drivers From Windows Update” to cancel thesearch.