Taurus TF-ERGO-X Assembly And Operating Instructions Manual

Also see for TF-ERGO-X: Assembly and operating instructions

72 ASSEMBLY INSTRUCTIONS, MAINTENANCE AND CARE2.1 General instructions+ Please check if all parts and tools belonging to the equipment are included in the delivery and ifthere is any transport damage. If there are any complaints, please contact your contract partnerdirectly.+ Some of the nuts and bolts to be used in assembly are already pre-mounted in order to makeset-up as easy as possible.+ The equipment must be assembled by adults. In case of doubt, ask for assistance from anotherperson with technical skills.+ Keep children away from the equipment during assembly, because small parts are included inthe delivery and may be swallowed.+ Make sure that you have enough space (at least 1.50 m) in every direction during assembly.+ Do not leave any tools and packaging materials like plastic sheeting laying around to avoiddanger of suffocation for children.+ Assemble the equipment on an underlay mat or on the cardboard packaging in order to avoiddamage to the equipment and to the floor (scratches).+ Before starting assembly, all individual parts should be placed on the floor next to each other.+ Read the assembly instructions carefully and assemble the equipment according to theillustrations. Proceed carefully and cautiously.+ First loosen all parts and check for their correct fitting. Then tighten the screws using a tool.+ Modifications to the design or improper repairs may pose a hazard to the user and should notbe carried out. The product warranty may be void as a result.+ Only authorized service technicians are permitted to carry out all servicing and/or repairs – itexcludes maintenance and care.+ Damaged or worn components may impair your safety and the lifespan of the equipment.You should therefore immediately replace damaged or worn components. Please contact yourcontract partner in such a case. The equipment should no longer be used until it has beenrepaired. When needed, only use original Taurus® spare parts.+ Check the tightness of all screw connections once a month.+ In order to be able to guarantee the constructively defined safety level of this equipment, werecommend having the equipment regularly maintained (at least once a year) by specialists(service technicians of your contract partner).+ The equipment may be cleaned of dust, dirt and sweat using a damp cloth. The use of solventsshould be strictly avoided. Also, make sure that no liquids (e. g. sweat) get into the openings ofthe equipment (e. g. console).