Taylor-Dunn B0-248-36 Operation, T Roubleshooting And Replacement Parts Manual

Also see for B0-248-36: Service replacement parts

Contents

Taylor-Dunn B0-248-36 Operation, T Roubleshooting And Replacement Parts Manual Manual pdf 115 page image

Maintenance, Service, and RepairTransmission Page 3CHANGE OIL6. Raise the rear of the vehicle and support with jack stands.7. Place a four quart drain pan under the driveassembly.8. Remove the drain plugs from the differential caseand gear case.9. Once the oil has drained, replace the drain plugsand lower the vehicle to the ground.10. Remove the fill/level plug and fill the differential upto the bottom of the level plug opening. Refer tothe Lube Chart section for information regardingtype of oil.11. Replace the fill plug.12. Reconnect the main positive and negative cablesat the batteries.13. Remove the blocks from the wheels.14. Release the park brake and test drive the vehicle.1. Make sure the key-switch is in the “OFF” position, then removethe key.2. Place the forward-reverse switch in the center “OFF” position.3. Set the park brake.4. Place blocks under the front wheels to prevent vehicle movement.5. Disconnect the main positive and negative cables at the batteries.