Teac LEV3294HD User Manual

Also see for LEV3294HD: Quick start guide

Wall Mounting InformationWall Mounting (optional)Removing the standFall prevention (NOTE: Important safety measure)How to mount the LED TV on the wall200mm100mm1. Place the unit (face down) on a soft surface.2. Loosen and remove the screws securing the stand to the TV.3. Gently remove the stand.4. To reinstall the stand, place the unit (face down) on a soft surface and reverse the aboveinstructions.To prevent the TV from tilting forward and falling over to cause damage or injury, please secure the TV to your table or wallusing screws or eyebolts and strong cord (not provided). An example on fixing the TV to a table is shown below:1. Install a wood screw or eyebolt into the table that is supporting the TV.2. Fix a machine screw into a screw hole near the base in the back of the TV.3. Tie the wood screw or eyebolt to the machine screw with a strong cord.Alternatively, secure the TV to the wall directly behind it by fixing eyebolts to the wall and tying them to screws fixed on thecentre of the TV back panel.1. After detaching the stand, fasten 4 mounting screws (thread size M4X10mm - NOT SUPPLIED. Please contact your2. Fasten the wall mounting bracket (NOT SUPPLIED, please contact your local hardware store) with screws to the wall.local hardware store) into the 4 screw holes on the rear cover, see the figure below.3. Carefully check for the strength of the connection before releasing the LED TV.NOTE : For more detailed instructions please refer to your “after market” wall mounting instruction book.Thread hole size – M4 x 10mm depth (TV mounting screw size) on the TV.(Stand)Your LED TV is able to accommodate wall mounting with the use of a wall mount bracket (not supplied, please contact yourlocal hardware store) and the mounting hole screw size (M4X10mm) on the back of the unit. If the TV stand is alreadyinstalled, remove it prior to wall mounting. Please refer to the figures and procedure below.NOTE: Make sure the power is completely disconnected and unplugged before starting.Basic OperationOSD MenuMultimediaOperationRecordingOperationUser GuidanceInformationMaintenanceand Service DVD Operation