PAGE 1 OF 20313 IH-1978Figure 1 Figure 2 Figure 31. Remove the included washersand bolts from the frames,using the included Allenwrench. (See Figure 1)2. Slide the frame and the framecross bar together, aligning thebolt holes. (See Figure 2)3. Insert bolts into aligned boltholes, placing the washersbetween the frame and bolt.Tighten using included Allenwrench. (See Figure 3)ASSEMBLY INSTRUCTIONSPARTS LISTHorizontal Hang Bar x 1Caster x 4Caster Bumper x 4Bolt x 4Nut x 4 Washer x 4Frame x 2Vertical Bar x 2Frame Cross Bar x 1H-1978Z-RACK1-800-295-5510uline.comπAllen Wrench Crescent WrenchTOOL INCLUDED

U-Line H-1978 Assembly Instructions Manual