U-Line H-2789 Quick Start Manual
  |
PAGE 1 OF 2 0319 IH-2789π H-2789FOLDING CHAIRDOLLY – 2 TIER1-800-295-5510uline.comPARTSASSEMBLYNut x 12 Bolt x 12 End Cap x 24T-Bar x 2Base Crossbeam x 1Crossbeam with Chair Hanger x 2TOOLS NEEDEDRubber Mallet Wrench1. Ensure there are no missing or damaged parts.2. While holding up one of the T-bars (A), boltcrossbeam (B) into the middle set of holes.(See Figure 1)NOTE: There are three holes in the middle set.Use the two lower holes. (See Figure 1)3. Bolt the other side of the crossbeam (B) to theopposite T-bar (A) in the middle set of holes.(See Figure 2)NOTE: There are three holes in the middle set.Use the two lower holes. (See Figure 2)Figure 1 ABFigure 2 AB |
Related manuals for U-Line H-2789
U-Line H-2489 Quick Start Manual
U-Line H-6278 Quick Start Manual
U-Line H-7589 Quick Start Manual
U-Line H-2932 Quick Start Manual
U-Line H-2293 Quick Start Manual
U-Line H-2489A Quick Start Manual
U-Line H-4210 Quick Start Manual
U-Line H-1550 Quick Start Manual
U-Line H-1376 Quick Start Manual
U-Line H-3641 Quick Start Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine