PAGE 1 OF 6 0421 IH-56731-800-295-5510uline.com48" ROUNDCONFERENCE TABLEH-5673NOTE: Assemble on a smooth, non-marringsurface to avoid scratching the table.• Check that all parts are included.IMPORTANT: The arrow on the camlock (B) mustpoint toward the camlock pin (A) for properalignment. Turn camlock (B) clockwise until itlocks with pin (A).1. Insert four camlocks (B) into holes on leg panel (2).Insert four camlock pins (A) and two dowels (C) incenter leg (1). Fit center leg (1) and leg panel (2)together and turn each camlock (B) clockwise until itlocks. Cover each camlock (B) with a deep camlockcap (G). (See Figure 1)2. Repeat to attach leg panel (3) to center leg (1).(See Figure 1)TOOLS NEEDEDPhillipsScrewdriverDrill(Optional)PARTSASSEMBLYCamlock Pin x 10 Screw x 29#4 5/8"Deep CamlockCap x 10Camlock x 10 Dowel x 3 Floor Glide x 4 L-Bracket x 4A F GB C D EIMPORTANT: Function of Cam1/4 Right Turnfor LockingMake sure the arrow is pointing upwardsbefore inserting into the panel's hole.22231C1 1AB GFigure 1Two Person AssemblyRequiredPara Español, vea páginas 3-4.Pour le français, consulter les pages 5-6.