UBSAN X4 STAR FPV User Manual
               | |
10 ©2016 Hubsan哈博森科技 版权所有5.1 FLIGHT ENVIRONMENT(1) The flying area should be open and is without tall buildings, otherwise the GPSmay not work.(2) Do not fly in bad weather like windy, snowy, rainy or foggy days.(3)Stay away from obstacles, crowds, power cables, trees and water etc.(4) Do not fly near the radio towers or airports.(5) The quad will not work in the Antarctic Circle or the Arctic Circle.(6) Obey the local laws and regulations, do not fly in restricted areas.(7) Only fly in good weather conditions and air temperatures between 0-40(not including rain, wind or other extreme weather.)5. START TO FLYHigh Tension Line RainInterferenceAirport5.3 BINDINGThe binding is completed in the factory.For re-binding, press Photo button and power on the transmitter simultaneously until “Bind toPlane” is displayed, then power on the drone and place it very close to the transmitter, the bindingprocess will be completed after one “ beep” sound.If the binding failed, please power off the drone and repeat the above steps.In case of any injuries caused by improper operations, it is advised that beginners learn tooperare the quad under the guidance of professional.It is very improtant to choose theright flight environment.5.2 SAFETY CHECK BEFORE FLIGHT(1) Make sure the batteries are fully charged. (Quad,transmitter or smart device)(2) Make sure propellers are installed properly.(3) Insert Micro-SD card for pictures and videos.(4) Check if motors work well after binding. |
Related manuals for UBSAN X4 STAR FPV
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine