UFM CoolPoint CP2-V8 Installation And Operation Manual
              | |
5 CPBatMan080212UNIVERSAL FLOW MONITORS, INC.GENERAL SPECIFICATIONSMaximum Operating Pressure: 300 PSIG (20.4 Bar)Minimum Operating Pressure: 10 PSI of back pressure is required for the formation ofvortices. See INSTALLATION and PRESSURE DROP CHARTSMaximum Operating Temperature: 130 °F (54 ºC). Rating applies to both fluid & ambient temp.Minimum Operating Temperature: 35 °F (2 ºC). Rating applies to both fluid & ambient temp.Maximum Flow: Meters may occasionally be over-ranged up to 125% ofcapacity without damaging the meter (display reads up to125% of max flow)..Flow Capacities: 3/4" = 25 GPM (95 LPM)1" = 50 GPM (190 LPM)1 1/2" = 100 GPM (380 LPM)2" = 200 GPM (750 LPM)Turndown Ratio (max to min flow): 10:1 standard.Process Connections: Female NPT with BSPP and BSPT optionalWetted Parts: Body is brass or 316 Stainless Steel. Sensor is PVDF or PEEK.Seals are Viton®Display: 3-digit LCD6-digit LCD (Totalizer mode only)Displays in GPM, LPM and CMHDigit height = 0.3"Power: 3 AA Alkaline batteries. Provides 45 days of continuousoperation (longer if flow measurement is intermittent – up to 1year)Low Battery: “Mode” LED blinks red.Enclosure rating: Designed to meet the requirements of IP67Accuracy: 2% Full scaleResponse Time: 450 ms.Repeatability: .25% of indicated*Viton ® is a registered trademark for DuPont Performance Elastomers. |
Related manuals for UFM CoolPoint CP12-V8
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine