ULTIMATE SPEED UASB 12 C2 Operating Instructions Manual

Also see for UASB 12 C2: Operating instructions

Contents

ULTIMATE SPEED UASB 12 C2 Operating Instructions Manual Manual pdf 8 page image

6 GB~ Ensure that the 12-V plug is firmly seat-ed in the 12-V socket. Otherwise, aloose contact may switch the device fre-quently on and off, which may lead tooverheating.~ Always connect the 12-V plug to a 12-Vsocket, and never to a 24-V socket.~ Never use any abrasive, corrosive orscratching cleaning agents.4. Items supplied1 car heating mat|71 user instructions5. Unpacking andconnecting5.1 Unpacking1. Remove all parts from the packaging.2. Check that all parts are present and in-tact.5.2 Fastening the carheating matNOTE: Not always all fastening belts|1/5must be used. Test the best way to fasten thecar heating mat|7.1. Unfold the car heating mat|7.2. Figure A: place the car heating mat|7on the car seat. The fastening belts|1/5point backwards.The car heating mat|7 must never bepushed under the head rest (Figure B).Lower fastening belts|5:3. Figure C: insert the lower fasteningbelts|5 through the fastening plates|6and close the hook-and-loop fasteners,so that the lower fastening belts|5 ini-tially remain long.4. Figure D: insert the two fasteningplates|6 backwards through the carseat between the back rest and the seatsurface.5. For a good grip, evenly adjust thehook-and-loop fasteners of the lowerfastening belts|5.Upper fastening belts|1:6. Fasten the upper fastening belts|1 tothe head rest:- Figure E: open the fastening rings|2and attach these to the mountingrods of the head rest (if present).- Figure F: open one of the fasteningrings|2 and fasten it to the other one.Place the upper fastening belts|1around the head rest (if it does nothave mounting rods).7. For a good grip, evenly adjust thehook-and-loop fasteners of the upperfastening belts|1.5.3 Connecting the carheating matWARNING! Risk of material dam-age!~ Always connect the 12-V plug to a 12-Vsocket, and never to a 24-V socket.• Connect the 12-V plug|3 firmly to thecigarette lighter or another adequate12-V socket.• The power indicator|8 is lit as long asthe car heating mat|7 is attached to thecar power supply.6. Switching the deviceon and off1. Switch on the device by pushing theon/off switch|4 to I.2. Switch the device off by pushing theon/off switch|4 to 0.BBB$XWRKHL]PDWWHB%B5(&+76ERRN6HLWH0LWWZRFK-XOL