ULTIMATE SPEED ULG 12 A2 Operation And Safety Notes

Also see for ULG 12 A2: Operation and safety notes translation of original operation manual Operation and safety notes Operation and safety notes Operation and safety notes Operation and safety notes

Contents

ULTIMATE SPEED ULG 12 A2 Operation And Safety Notes Manual pdf 12 page image

12 GBOperation / Maintenance and care / Warranty and service informationConnect the black connector clamp 6 to thenegative battery terminal. (The negative terminalis marked with a “-“ symbol and a black mark.)If the connector clamps are connected correctly,the car charger will automatically select the cor-rect battery type. You may review it in the “Bat-tery Type“ option field and if necessary changeit by pressing the battery type button 2 .Now select the “Start“ function using the ChargeStart button 3 . The cart charger will now ana-lyse the battery‘s charge level. The display willnow read “0“.Start the vehicle‘s ignition. The display will nowshow a 5 second countdown (of which 2 secondpriming / analysis function and 3 second jumpstart function at 75 A) when needing the carcharger for jump starting (previously analysedby the car charger). During this countdown thecar charger will briefly deliver 75 A to bridgethe battery to start the car. This is followed bya 180 second pause to protect the battery. Thecycle will now restart (2 second priming / anal-ysis function and 3 second jump starting at75 A / 180 second pause).To disconnect the device, first remove the termi-nal clamps ( 6 / 7 ) and unplug the powercord 9 .Note: If the battery is completely drained, the 75 Awill not be sufficient to start all engines (e.g. dieselvehicles).In this case, please select the “Fast Charge“option using the Charge Start button 3 andcharge the battery 60 % (preheating of dieselengines draws power from the battery. This re-quires 60 % after preheating).You can monitor the charging process in the displayby selecting the “Battery %“ option using the digitaldisplay button 1 .Once 60 % has been reached, jump start again.Attention: Exit the mode by unplugging themains cable 9 .Replacing the fuseThe car charger fuse can be damaged by e.g. hard-ware failure, overload, etc.Unplug the power cord 9 before replacingthe fuse.Remove the fuse 4 cover by slightly pressingin the side.Unscrew the fuse 4 with a fitting open-endspanner and secure the new fuse.Then screw it tight and replace the cover 4 .Note: If you need a new fuse, please contactour service department (see chapter Warrantyand Service Information).Maintenance and careAlways unplug the power cord 9 from the mainssocket before working on the car charger.The device is maintenance-free. Switch off thedevice. Clean the device‘s metal and plastic witha dry cloth.Never use solvents or other abrasive cleaners.Warranty and serviceinformationCreative Marketing Consulting GmbHwarrantyDear customer,the warranty for this device is 3 years from the dateof purchase. In the event of product defects, youhave legal rights against the retailer of this product.Your statutory rights are not limited in any way byour warranty detailed below.Warranty termsThe warranty period begins on the date of purchase.Please retain the original receipt safely.This document is required as your proof of purchase.Should this device show any defect in materials or