GB/NI/IE7Introduction / Safety notes Parts descriptionDigital display buttonBattery type buttonCharge start buttonFuse with cover"+" pole connection cable (red)"–" pole connection cable (black)Mains cableDigital display Technical specificationsInput voltage: 230 V~ 50 HzReturn current*: < 5 mA (no AC input)Nominal output voltage: 6 V/12 VCharge current: 2 A, 6 A, 12 A ± 10%Battery type with: 12 V/6 V and8–180 Ah capacityHousing protection type: IP 20* = Return current means the current that the char-ger consumes from the battery when no mainscurrent is connected. Delivery contentsCheck the scope of delivery and thedevice as well as all parts for damageright after unpacking. Do not take adefective unit or parts into operation.1 Charger Ultimate Speed ULG 12 B32 Quick contact connection terminals(1 red, 1 black)1 original operating instructionsSafety notesKEEP OUT OF THE REACHOF CHILDREN! DANGER! Avoid danger tolife and danger of injury fromimproper use! CAUTION! Do not operate thedevice with a damaged cable,mains cable or mains plug.Damaged mains cables posedanger to life from electric shock. Have the mains cable only re-paired by authorized and trainedspecialists if there is any damage!Contact the service point of yourcountry if you need any repair! DANGER OF ELECTRICSHOCK! Ensure that thevehicle is not in operation if thebattery is installed firmly in thevehicle! Switch off the ignition andput the vehicle into the parkingposition, with the parking brakeengaged (e.g. car) or the ropeattached (e.g. electrical robot)! DANGER OF ELECTRICSHOCK! Disconnectthe car charger from the mainsbefore removing the connectionterminals. Connect the connection terminalthat is not connected to the carbody first. Connect the other connection ter-minal to the car body away fromthe battery and the gasoline line. Connect the car charger to thesupply grid only thereafter.21345678