ULTIMATE SPEED ULG 17 A1 Operation And Safety Notes Translation Of The Original Instructions

Also see for ULG 17 A1: Operation and safety notes translation of the original instructions Operation and safety notes translation of the original instructions Operation and safety notes Operation and safety notes translation of the original instructions Operation and safety notes

Contents

ULTIMATE SPEED ULG 17 A1 Operation And Safety Notes Translation Of The Original Instructions Manual pdf 61 page image

61GB/MTOperation / Maintenance and care / Warranty and service informationz Alternator test function Attach the red connection terminals 5to the plus pole of your battery. (The pluspole is marked by a “+” and a red mark.) Attach the black connection terminals 4to the minus pole of your battery.(The minus pole is marked by a “–” and ablack mark.) Connect the mains cable 7 of the carbattery charger to the socket.Set the “Alternator” function (LED next tothe alternator) via the button 1 . A %-valueis displayed. Start the engine. If the %-valuerises with the engine running, the alternatorwill charge the battery. If the %-value dropsor remains the same, there is a problem withthe alternator, the connection or the battery. Disconnect the device from the mainscurrent. Disconnect the “–”-pole quick contact-connection terminal (black) 4 from the“–”-pole of the battery. Disconnect the “+”-pole quick contact-connection terminal (red) 5 from the“+”-pole of the battery.z Replacing the fuseThe fuse of the car battery charger maybe damaged, e.g. by a device defect,overload, etc. Before replacing the fuse, pull themains cable 7 . Remove the cover of the fuse 8by depressing it slightly on the side. Unscrew the fuse with a suitable open-end spanner and secure the new fuse. Then tighten it and reattached the cover 8 .Note: If you need a new fuse, contact ourservice (see chapter with notes on guaranteeand service processing).z Maintenance and care Always pull the mains cable 7 from thesocket before you perform any work atthe car charger. The device is maintenance-free.Deactivate the device. Clean the metaland plastic surfaces of the device witha dry cloth. Never use any solvents or other aggres-sive cleaning agents.z Warranty and serviceinformationWarranty from Creative Marketing &Consulting GmbHDear Customer,The warranty for this equipment is 3 yearsfrom the date of purchase. In the event ofproduct defects, you have legal rights againstthe retailer of this product. Your statutoryrights are not affected in any way by ourwarranty conditions, which are describedbelow.z Warranty conditionsThe warranty period begins on the dateof purchase. Please retain the originalproof of purchase. This document is requiredas your proof of purchase. Should thisproduct have a material or manufacturingerror within three years of the purchasedate, the product will be repaired orreplaced – dependent on our choice – byus at no cost to you. This warranty servicerequires that you retain proof of purchase(sales receipt) for the defective device for thethree year period and that you briefly explainin writing what the fault entails and when itoccurred.If the defect is covered by our warranty, wewill repair and return your product or send