8GB/IE/NIz EquipmentAfter unpacking the product,please check that all of thepackage contents arepresent and that the power bankwith compressor is in perfectcondition. Do not use the deviceif it is defective.1 Power bank with compressor2 On/Off switch for compressor(0/I)0 means “off”.I means “on”.3 “+” button4 “–” button5 Menu button “M”6 Digital pressure gaugewith pressure display(not calibrated)7 LED light8 Vehicle jumpstart outlet9 Power bank switch10 Charging port 15V /0.4A11 Output USB 5V /2A12 Output USB 5V /1A13 Indicator lights14 Storage compartmentfor valve adapter15 Hose connection16 Cover cap for hose connection17 Compressed air hose18 Jumper cable19 Green Start LED20 Red Error LED21 Valve adapter for balls22 Valve adapter for inflatable items23 Valve adapter for inflatable items24 AC adapterPlease note: The use of the term‘product’ or ‘device’ in the followingtext refers to the power bankwith compressor named in theseoperating instructions.z Technical specificationsThe four individual cells used toconstruct the rechargeable batteryare connected in series to produce atotal voltage of 4 × 3.2V ≈ 12V anda capacity of 3500mAh. The batteryoutput produced in this way is thesame as the output from a recharge-able battery with a total capacity of14000mAh at 3.2V.Model: UPK 10 B1Battery type: Lithium ironphosphateBattery capacity: 14.000mAh3.2V ,44.8WhCharge cycles: 2000Charging time: up to 8 hoursPeak current: 400AStarting current: 200AOperatingtemperature: 0°C–60°CVoltage: 12VInput voltage(charging port): 15V /0.4AIntroduction