UNI Geräte 40-EVS Series Operating And Mounting Manual
                   | |
Contents
| 
Operating and mounting manual (translation)EVS________________________________________________________________________________________________________220.100.022-10 page 2 /19 edition 10/2013TM 33001.0 General RemarksThis operating manual includes instructions to assemble and operate the valve in the prescribed andsafe way. Additionally, the adeqaute operating instructions (BTA) of each special solenoid drivemust be considered.Series MG... 220.100.038Series MG...X 220.000.040Series MG…Xme 220.000.039If any difficulties appear that can not be solved by means of the operating manual, further informationmay be demanded from the manufacturer.This operating manual is in accordance with the relevant valid EN safety standards and the validprescriptions and rules of the Federal Republic of Germany.If the solenoids are used abroad of the FRG, the operator and/or the person who is responsible for theplant concept must take care that the valid national rules are met.The manufacturer reserves the right of any technical change and improvement.The use of these operating instructions suppose the qualification of the user according to paragraph2.3 “qualified staff”.The operating staff must be trained in accordance with the operating instructions. The operatingmanual must always be available at the location where used.1.1 Valve dataManufacturer:UNI Geräte E. MangelmannElektrotechnische Fabrik GmbHHoltumsweg 13D-47652 WeezePhone: +49 (0) 2837/9134-0Fax: +49 (0) 2837/1444E-Mail: info@uni-geraete.deHomepage: www.uni-geraete.deDesignationDirectly functioning, currentless closed, spring safety shut off valve with magnet drive.Test basis: DIN EN 264E-DIN 3394-1DIN 3230 T5/T6 followingType: WorkingpressureAmbienttemperatureMedium MediumtemperatureTest pressure(*) PT16- EVS… 16 bar -10°C to +60°C Propan, Butan -30°C to +120°C PT 1625- EVS... 25 bar -20°C to +60°C Propan, Butan -30°C to +120°C PT 2540- EVS... 40 bar -20°C to +50°C Propan, Butan -30°C to +140°C PT 40120- EVS… 120 bar -20°C to +60°C Natural gas -20°C to + 60°C PT 180135- EVS… 10 bar -40°C to +80°C Fuil oil Water max. 100°C PT 203(*) Test pressure to perform leakage test "No FUNCTION TEST"Fitting position: vertical or horizontal drive.Switching cycles: see operating instructions (BTA) solenoid driveFlange connection measures acc. to DIN EN 1092-1 / ANSI 300 lbsFlange DN PN 15 20 25 32 40 50 65 80 100 125 15016-EVS 16/25 - - - O - - - - - - -25-EVS ANSI300lbs- - - O O O - - - - -40-EVS 40 - - O - - - - - - - -O Acceptance test certificate 3.2 possible, - not available, |
Related manuals for UNI Geräte 120-EVS Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine