UNISEM UniTracer L-100 User Manual
                                          | |
Contents | 
www.unisem.co.kr | iot@unisem.co.kr | +82.31.724.25484.3 Log data analysis method1) The device’s wire is opened by NFC generally.2) Wait until the device receives GPS signal and transmits ‘Open’ event.3) After ‘Open’ event is sent, the device will be changed to ‘setting mode’.4) The USB cable(A to Mini-B type) connects to PC.5) After Serial COM port is recognized, COM port connects to ‘115200’ Speed.Log TypeThe log is expressed in a format separated by ', '.Date, event code, open status, GPS reception status, latitude, longitude, battery value, NFC KeyvalueDateDate is shown as Year/Month/Day Hour: Minute: SecondEvent codeOpen 1Close 2Cut 3Shocking 4Broken 5Open status- ‘0’ means open.- ‘1’ mean close.GPS signal status- ‘V’ means that transmission is successful.- ‘A’ means that transmission is fail.Latitude & LongitudeDD mm.mmmmm type |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine