Ubee Interactive Connecting Devices to the NetworkUbee DDW3611 Wireless Cable Modem Gateway Subscriber User Guide • November 2012 13Refer to Troubleshooting the Installation on page 14 for troubleshooting information.2.2.2 Connecting a Wireless DeviceUse the following steps to connect a wireless device to the DDW3611 (for example, alaptop computer).StepsTo connect a wireless device:1. Access the wireless networking feature on your wireless device. On a Windowscomputer, for example, double-click the Wireless Network Connection icon in thesystem tray (lower-right side of the Windows desktop).2. Click View Wireless Networks. The device is shipped with a default SSID. The SSIDis the name of the wireless network broadcast from the device so that wireless clientscan connect to it.3. Double-click your SSID in the wireless networks window. The default SSID is thedevice name DDW3611 plus the last 2 characters of the cable modem’s MAC address,with letters entered in upper case.Example: DDW361184Notes: You can find the MAC address on the device label or by opening an Internetbrowser window to the device. Refer to Using the Information Option on page 21 forinstructions. If the subscriber changes the SSID, the device does not revert to thisdefault SSID upon any reset of the device, except in the case of a manual reset usingthe device’s Web user interface. See Understanding the Tools Menu on page 81.When prompted, enter the Network Key, which is the device name (DDW3611) plusthe last 6 characters (3 octets) of the cable modem’s MAC address (UPPER case, ifletters).Example: DDW3611E44284 If using WPS, enter the WPS personal identification number (PIN). The WPS PINis a randomly-generated number found on the Wireless Primary Network screen.Refer to Using the Primary Network Option on page 61.WPA-WPA2 AES is the default encryption method.4. Confirm connectivity by opening a Web browser and going to any Web site(for example, http://www.wikipedia.org) or access the Web interface for theDDW3611.