Ubiquiti AMPLIFI User Manual

Also see for AMPLIFI: User guide

Ubiquiti AMPLIFI User Manual Manual pdf 18 page image

14Chapter 4: Installing Without the AppAmpliFi User GuideConnection Type1. Click the Connection Type drop-down menu and selectDHCP, Static, or PPPoE.2. Proceed to the section in this chapter that correspondswith your Connection Type.DHCPDHCP (Dynamic Host Configuration Protocol) automaticallyconfigures your AmpliFi Router.1. Click Save & Continue.The AmpliFi Router will emit a sound indicating that it hasbeen configured.WAN IP110.0.2.192ROUTER IP192.168.124.1Configuration is complete.StaticThe Static option allows you to manually enter informationgiven to you by your Internet Service Provider (ISP).1. Enter the appropriate information into each of thecorresponding fields.• IP Address Enter the Internet IP address of the Router.• Network Mask Enter the network or subnet mask of theRouter.• Gateway Address Enter the WAN IP address of theservice provider’s gateway router.• Primary DNS Enter the IP address of the serviceprovider’s primary DNS server.• Secondary DNS Enter the IP address of the serviceprovider’s secondary DNS server.2. Click Save & Continue.The AmpliFi Router will emit a sound indicating that it hasbeen configured.WAN IP110.0.2.192ROUTER IP192.168.124.1Configuration is complete.