Antenna CompatibilityThe airFiber AF‑4X radio is designed for use with the followingairFiber X antenna models:• AF‑5G30‑S45• AF‑5G34‑S451The AF‑4X can also operate with the following RocketDish™antenna models:• RD‑5G302• RD‑5G342Installation Requirements• Clear line of sight between airFiber radios• Clear view of the sky for proper GPS operation• Vertical mounting orientation• Mounting point:• At least 1 m below the highest point on the structure• For tower installations, at least 3 m below the top ofthe tower• Ground wires – min. 10 AWG (5 mm2) and max. length:1 m. As a safety precaution, ground the airFiber radio togrounded masts, poles, towers, or grounding bars.WARNING: Failure to properly ground yourairFiber radio will void your warranty.• (Recommended) 2 Outdoor Gigabit PoE surge protectorsNote: For guidelines about grounding and lightningprotection, follow your local electrical regulatorycodes.• Outdoor, shielded Category 6 (or above) cabling andshielded RJ‑45 connectors are required for all wired Ethernetconnections.1 Check your local/regional regulations for the maximum antenna gainallowed for your application.2 Requires Universal Bracket (included) or AF‑5G‑OMT‑S45 Conversion Kit(not included).www.4Gon.co.uk info@4gon.co.uk Tel: (0)0330 088 0295 Fax: +44 (0)1245 808299