Ubiquiti EdgeRouter PoE ERPoe-5 Quick Start Manual

Also see for EdgeRouter PoE ERPoe-5: Quick start guide Quick start guide Quick start guide Quick start guide

Contents

Ubiquiti EdgeRouter PoE ERPoe-5 Quick Start Manual Manual pdf 6 page image

4EdgeRouter™ P oE Quick Start GuideHardware InstallationMount the EdgeRouter PoE on a wall or place it on a bench top.Note: Keep 20 mm of clearance next to the ventilationholes for adequate airflow.Cabling Requirements• For indoor applications, use Category 5 (or above) UTP cablingapproved for indoor use.• For outdoor applications, shielded Category 5 (or above) cablingshould be used for all wired Ethernet connections and shouldbe grounded through the AC ground of the power supply. Werecommend that you protect your outdoor networks from themost brutal environments and devastating ESD attacks withindustrial‑grade shielded Ethernet cable from Ubiquiti Networks.For more details, visit www.ubnt.com/toughcableNote: Although the cabling can be located outdoors,the EdgeRouter PoE itself should be housed inside aprotective enclosure.Wall-MountingTo mount the EdgeRouter PoE on a wall, you will need a drill, a6 mm drill bit, and a Phillips screwdriver.1. Use a 6 mm drill bit to drill two holes 100 mm apart. (You canuse the template on page 16 to mark the holes.)2. Insert the M2.9 Anchors into the holes. Use a Phillips screwdriverto secure a M2.9x20 Screw to each anchor. Leave a clearance ofapproximately 3 mm between each screw head and its anchor.100 mm3 mmNote: You can also mount the EdgeRouter PoEin a vertical orientation.