Ubiquiti LTU-Lite Quick Start Manual

Also see for LTU-Lite: Manual Quick start guide Quick start guide

4. Select your Country and Language. You must agree to the Terms of Use to use theproduct. Click Continue.The LTU Configuration Interface will appear, allowing you to customize your settings asneeded.UISP ManagementYou can manage your device using UISP, which lets you configure, monitor, upgrade, andback up your devices using a single application. Get started at uisp.ui.comFind My AP1. Click the icon.2. In the Wireless Settings section, change the channel bandwidth (default: 20 MHz) asneeded.3. Click Find AP.4. The device will scan for nearby APs. Click Select for the appropriate AP. To run the searchagain, click Scan.5. Follow the on-screen instructions.Installer Compliance ResponsibilityDevices must be professionally installed and it is the professional installer’s responsibilityto make sure the device is operated within local country regulatory requirements.The Auto Output Power field is provided to the professional installer to assist in meetingregulatory requirements.SpecificationsLTU-LiteDimensions 153 x 84 x 39.5 mm(6.02 x 3.31 x 1.56")Weight 250 g (8.82 oz)Networking Interface (1) 10/100/1000 Ethernet PortEnclosure Outdoor UV Stabilized PlasticNote: For example, if the AP’s channel bandwidth is set to 50 MHz and yourdevice is set to 20 MHz, then your device will not see that AP and you shouldchange the channel bandwidth on your device.LTU-Lite Quick Start Guide