Ubiquiti LiteBeam LBE-5AC-16-120 Quick Start Manual

Contents

4. Connect the Ethernet cable from the LiteBeam’s Ethernetport to the POE port of the Gigabit PoE adapter.5. Connect an Ethernet cable from your LAN to the adapter’sLAN port.6. Connect the Power Cord to the adapter’s power port.Connect the other end of the Power Cord to a power outlet.Mounting the PoE Adapter (Optional)1. Remove the PoE Mounting Bracket from the adapter, placethe bracket at the desired location, and mark the two holes.2. Pre‑drill the holes if necessary, and secure the bracketusing two fasteners (not included).3. Align the adapter’s slots with the tabs of the PoE MountingBracket, and then slide the adapter down.