Hardware OverviewResetButton PowerTerminalBatteryTerminalEthernetPortsOutputLEDSystemLEDPV PanelTerminalPV PanelTerminalInterface DescriptionSystem LED Steady on when system is powered on;Red when battery polarity is reversed.ResetButtonPress and hold the Reset button for 10seconds to restore factory default settings.Press and hold the Reset button for 16seconds if:• The device does not respond to a factoryreset.• The web interface is unreachable.• There doesn't appear to be any othernoticeable activityBattery Terminal Four-pin terminal block for NTC and batteryPower Terminal Two-pin terminal block for power (24VDC out)PV Panel Terminals H4 connectors for solar panelEthernet Ports Supports 10/100 Ethernet connections andpassive 24V, 2-pair PoE output.Output LED Steady on when output power is enabled.