IntroductionThank you for purchasing the Ubiquiti Networks™ UniFi™Enterprise WiFi System. The UniFi Enterprise WiFi Systemincludes the UniFi Controller software, which allows you tomanage your wireless network using a web browser.The UniFi Controller software and User Guide are available fordownload at downloads.ubnt.com/unifiThis Quick Start Guide includes the warranty terms and is foruse with the UniFi AP AC Outdoor, model UAP-AC Outdoor.The UniFi AP can be powered by any of the following:• PoE GigE Adapter (included)• 48V, PoE 802.3at compliant switch• Ubiquiti Networks TOUGHSwitch PRO, model TS-8-PROThe UniFi AP also includes the necessary hardware formounting the unit on a wall or a pole.Installation Requirements• 13 mm wrench• Shielded Category 5 (or above) cabling should be usedfor all outdoor wired Ethernet connections and should begrounded through the AC ground of the PoE.We recommend that you protect your networks frombrutal outdoor environments and devastating ESDattacks with industrial-grade shielded Ethernet cable fromUbiquiti Networks. For more details, visitwww.ubnt.com/toughcableTERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernetcable and earth grounding must be used as conditions of product warranty. TOUGHCable isdesigned for outdoor installations. It is the customer’s responsibility to follow local countryregulations, including operation within legal frequency channels, output power, and DynamicFrequency Selection (DFS) requirements.