Ubiquiti UAP-PRO Quick Start Gude

Also see for UAP-PRO: User guide User guide Quick start guide

Contents

Ubiquiti UAP-PRO Quick Start Gude Manual pdf 6 page image

Hardware InstallationThe UniFi AP‑PRO can be mounted to the wall or ceiling.Perform the steps for the appropriate installation:Wall Mount1. Position the Mounting Bracket at the desired location onthe wall with the cable feed slot pointed towards the floor.2. Use a pencil to mark the three holes on the wall. Use a6 mm (1/4") drill bit to drill the holes.TopOptional 25 mm (1 in) Hole forEthernet Cable Feed through Wall3. Follow the instruction for your Ethernet cable feed:‑ Feeds Through the Wall Cut or drill a circleapproximately 25 mm (1 in) in diameter, just belowthe bottom center of the Mounting Bracket (as shownabove). Then feed the CAT5/6 cable through the hole.‑ Feeds Along the Mounting Surface Remove theCable Feed Plug on the side of the UniFi AP‑PRO.*640-00042-03*640-00042-03