Ubiquiti UAP-PRO User Manual
Also see for UAP-AC: User guideQuick start guide
                                                               | |
Contents
| 
10Chapter 2: InstallationUniFi™ AP-PRO and AP-AC User GuideUbiquiti Networks, Inc.Powering the UniFi AP-ACThe UniFi AP-AC can be powered directly by a compatiblePoE switch or with the included PoE GigE Adapter.Connecting to a PoE SwitchConnect the other end of the Ethernet cable coming fromthe Main port on the UniFi AP directly to a PoE port on oneof the following:• PoE+ 802.3at compliant switch• Ubiquiti Networks TOUGHSwitch PRO, model TS-8-PROTOUGHSwitch PRO Power Connection DiagramConnecting to the PoE GigE Adapter1. Connect the other end of the Ethernet cable comingfrom the Main port on the UniFi AP to the Ethernet portlabeled POE on the PoE GigE Adapter.2. Connect an Ethernet cable from your LAN to theEthernet port labeled LAN on the PoE GigE Adapter.3. Connect the power cord to the power port on the PoEGigE Adapter. Connect the other end of the power cordto a power outlet.After you install the hardware, proceed to the next section,Software Installation.Software InstallationInsert the UniFi Controller software CD into your CD-ROMdrive and follow the instructions for your specificcomputer type.Mac Users1. Click the Install icon.2. Click Continue and follow the on-screen instructions toinstall the software. |
Related manuals for Ubiquiti UAP-AC
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine