Ubiquiti UVC-G3-DOME Quick Start Manual
Also see for UVC-G3-DOME: Quick start guideUser guideQuick start guideQuick start guideQuick start guide
                                | |
Hardware InstallationThe UniFi Video Camera can be mounted on the wall or ceiling.The Ethernet cable can be fed through a hole in the wall/ceilingor can be run along the wall/ceiling.Wall Mount1. Position the Mounting Bracket at the desired location onthe wall with the Arrow pointing up.2. Mark the four mounting holes, and use a 6 mm drill bit todrill the holes.Arrow3. If your Ethernet cable feeds through the wall, cut or drill acircle approximately 18 mm in diameter (as shown below).Then feed the CAT5/6 cable through the hole.Optional 18 mm Hole forEthernet Cable Feed through the Wall |
Related manuals for Ubiquiti UVC-G3-DOME
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine