Ubiquiti UniFi UAP-Outdoor User Manual
Also see for UAP-Outdoor 5G: Quick start guide
                                                          | |
Contents
| 
3Chapter 2: InstallationUniFi™ AP-Outdoor User GuideUbiquiti Networks, Inc.Chapter 2: InstallationHardware InstallationThe UniFi AP-Outdoor is powered by the included PoE(Power over Ethernet) Adapter. To install the AP, performthe following steps:1. Connect an Ethernet cable to the primary Ethernet porton the UniFi AP-Outdoor, and connect the other end ofthe Ethernet cable to the Ethernet port labeled POE onthe PoE Adapter.2. Connect an Ethernet cable from your LAN to theEthernet port labeled LAN on the PoE Adapter.3. Connect the power cord to the power port on the PoEAdapter. Connect the other end to of the power cord toa power outlet.Below is an overview of the Power over Ethernetconnections.Power Connection DiagramNote: The UniFi AP-Outdoor supports Passive PoE,which works with the included PoE adapter. Ifyou want to power the UniFi AP-Outdoor from an802.3af compliant switch, Ubiquiti Networks offersthe optional Instant 802.3af Adapter to instantlytransform any PoE device into a fully 48V, 802.3afcompliant product. Product details are available onour website at http://ubnt.com/8023afMounting the UniFi AP-OutdoorThe UniFi AP-Outdoor can be mounted on a wall or pole.Wall MountTo mount the UniFi AP-Outdoor on a wall, use theincluded Wall Mount Bracket, screws, and anchors.1. Align the Wall Mount Bracket to the desired position ona wall.2. Use a pencil to mark the holes on the wall.3. Use a 6 mm drill bit to drill the holes in the wall.4. Insert the 3 screw anchors into the wall.5. Secure the Wall Mount Bracket to the wall by insertingthe self tapping screws into the anchors. |
Related manuals for Ubiquiti UAP-Outdoor 5G
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine