Ubiquiti UniFi UAP-PRO Quick Start Manual

Also see for UAP-PRO UNIFI: User guide Quick start gude Quick start guide

Contents

Ubiquiti UniFi UAP-PRO Quick Start Manual Manual pdf 6 page image

Installation Requirements• CAT5/6 cable• Phillips screwdriver• Drill and drill bit (6 mm for wall‑mounting or 3 mm forceiling‑mounting)• Optional: Drywall or keyhole saw (to cut 25 mm hole forEthernet cable feed)Hardware InstallationThe UniFi AP‑PRO can be mounted to the wall or ceiling.Perform the steps for the appropriate installation:Wall Mount1. Position the Mounting Bracket at the desired location onthe wall with the cable feed slot pointed towards the floor.2. Use a pencil to mark the three holes on the wall. Use a6 mm drill bit to drill the holes.TopOptional 25 mm Hole forEthernet Cable Feed through Wall3. Follow the instruction for your Ethernet cable feed:‑ Feeds Through the Wall Cut or drill a circleapproximately 25 mm in diameter, just below thebottom center of the Mounting Bracket (as shownabove). Then feed the CAT5/6 cable through the hole.‑ Feeds Along the Mounting Surface Remove theCable Feed Plug on the side of the UniFi AP‑PRO.