Ubiquiti UniFi User Manual

Also see for UniFi: Quick start guide Quick start guide Quick start guide Quick start guide User guide

Contents

Ubiquiti UniFi User Manual Manual pdf 5 page image

3Ubiquiti Networks, Inc.Chapter 2: InstallationUniFi Enterprise WiFi System User GuideChapter 2:InstallationHardware InstallationThe UniFi Enterprise AP is powered by the included PoE(Power over Ethernet) adapter. To install the AP, performthe following steps:1. Connect an Ethernet cable to the Ethernet port on theUniFi Enterprise AP.2. Connect the power cord to the power port on the PoEAdapter. Connect the other end to of the power cord toa power outlet.3. Connect the other end of the Ethernet cable to theEthernet port labeled POE on the PoE Adapter.Note: If you plan to mount the AP on your ceiling,perform the ceiling mount installation steps beforeconnecting the Ethernet cable to the PoE Adapter.Below is an overview of the Power over Ethernetconnections.Power Connection DiagramMounting the Access PointThe UniFi Enterprise AP can be wall-mounted ormounted on a ceiling. Perform the following steps for theappropriate installation:Wall-Mount1. Align the wall-mounting bracket with the Wall Mounttext facing up. There are horizontal and vertical lines onthe bracket to help with orientation.Wall Mount Wall Mount text2. Use a pencil to mark the holes on the wall.3. Use a 6 mm drill bit to drill the holes in the wall.4. Insert the 3 screw anchors into the wall.5. Secure the wall-mount bracket to the wall by insertingthe self tapping screws into the anchors.Wall Mount