5. Bend and form the wires to fit into the wall box. Ensure thewires are properly positioned to allow adequate room forthe mFi Outlet.6. Place the mFi Outlet inside the wall box and ensure theyoke is mounted flush with the wall for proper fitting of theWall Plate. Secure the mFi Outlet with the two screws.Note: Do not over-tighten or rely on the force ofthe screws to pull the mFi Outlet into the wallbox. If the wall box does not have enough roomto accommodate the mFi Outlet and the wiring,replace the wall box with a deeper or wider box.

Ubiquiti mFi-MPW Quick Start Manual