Page 4 of 15Intended UseThe Ultra-Tow 5000-Lb. Capacity Electric Trailer Jack has a ball and screw design. The brake motorincreases the lift efficiency and reduces friction. The motor works less, draws less amperage, createsless heat, and produces less noise. This greatly increases the motor and jack life. The brake motorensures free stops at any time, preventing damage caused by hard stops and excessive pressure.The 7-way connector plugs into your vehicle allowing you to lift or lower the jack with the push of abutton (no hard wiring). The jack has a one-piece, water-proof, industrial design cover. ImprovedLEDs illuminate the area in front of the jack for superior nighttime visibility. The plastic connectorstorage bracket holds your 7-way connector firmly in place to protect from weather, dirt, and damage.Packaging ContentsTechnical SpecificationsProperty SpecificationType 12V DC A-FrameLift Capacity (lb.) 5,000Support Capacity (lb.) 7,500Clearance: Bracket to Jack Top (in.) 24Length of Travel (in.) 18Length Retracted (in.) 9 (Measured from ground to center of mounting point)Length Extended (in.) 31-1/2 (Measured from ground to center of mounting point)Drop Leg Travel (in.) 4-1/2Jack Tube Size (in.) 2-1/4Crank Type Includes manual crank handleGround Support Foot padMount Type A-frame mounting plateConstruction SteelMount Type Fits 2 1/4in. mounting holesMount Height (in.) 9Important Safety Information⚠WARNING Read and understand all instructions. Failure to follow all instructions may result in serious injuryor property damage.Tools and Components Required• A-Frame Coupler with Lower Support Plate (owner supplied, not included)• Three Grade 5, 1in. Long, 3/8in.-16 UNC Bolts• Three 3/8in. Flat Washers• Three Lock Washers• 9/16in. Wrench (owner supplied, not included)• Torque Wrench (owner supplied, not included)• Wire Cutters (owner supplied, not included)• Wire Strippers (owner supplied, not included)• Crimpers or Soldering Iron (owner supplied, not included)