UniData Communication Systems Neon 3016A Manual
                                         | |
Contents
| 
Manual – 3000 NRL FamilyUnidata Manual - 3000 NRL Family - 17 09 2018.docx Page 143.3 Configure LoggerVarious logger parameters can be configured via the Configure Logger button.These parameters are divided into three menus;1. General2. Comms3. InputsPress the ENTER button (if the logger display is sleeping) and then the CONFIGURELOGGER button on the LCD touch screen to enter the configuration menus. Repeatedpressing of the CONFIGURE LOGGER button will allow access to the three differentmenus.To scroll through the list of parameters within each menu use the ▼ DOWN and UP▲keys. To change a parameter the ▼ DOWN and UP▲ keys should be used to navigate tothe desired parameter. The ◄ LEFT and RIGHT ► keys in combination with the ▼DOWN and UP▲ keys can be used to select and change values.3.3.1 General Configuration ParametersParameter NotesEnter PIN # Enter the current 4 digit PIN #Change PIN # Change the PIN #Turn display off Forces the screen to turn off immediatelyReset logger Reconfigures the logger to factory defaultsLock display on Prevents the screen from automatically turning offTurn logger off Disables the communications scheduler, instrument scan andscheme interpreterSet scan rateSet FASTSet YearConfigure the current time and dateSet MonthSet DaySet HourSet MinuteConfig General...press DownLoggerStatusSchemeStatusConfigureLoggerComment [AG1]: To do - check |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine