Unicorn LS2-H540 Safety Instructions

Contents

Unicorn LS2-H540 Safety Instructions Manual pdf 5 page image

Installation★ Machine installation should only becarri ed out by a qualified technician.★ Contact your Unicorn dealer or aqualified electrician for any electricalwork that may need to be done.★ The sewing machine weighs more than43kg.The instal lation should be carried out bytwo or more people.★ Th e top of the table should be 40 mmin th ickness and should be stron genough to hold the weight andwi thstand the vibration of the sewin gmach ine.★ Do not connect the power cord untilinstallation is complete. otherwise themach ine may operate if the treadle isdepressed by mistake, which couldresult in injury★ Be sure to connect the ground. If theground connec tion is not secure, yourun the risk of receiving a seriouselectric shoc k.★ Refer to the instruc tion manual for themotor for details on installing andusing the motor.★ All cords shoul d be secure d at least 25mm away from any moving parts.Furthermore. do not excessively bend thec able or secure it too firmly sta ples,otherwise shocks could occur★ install the belt covers to the machinehead and motor.★ Be sure to wear protective goggl es andgloves when handling the lubricating oiland grease, so that they do not getinto your eyes or onto your skin,otherwise inflammation can result.Furthermore, do not dri nk the oil or eatthe grease under any circumstances,as they can cause vomiting anddiarrhoea.Keep the oil out of the reach ofchildre n.★ Avoid setting up sewing machine nearsources o strong electrical noise suchas high-frequency welding equipment.If this precaution is not taken, incorrectmach ine operation may result.Sewing★This sewi ng machine shoul d only beused by operators who have receivedthe necessary training in safe usebefore hand.★The sewing machine should not be usedfor any applications other than sewing.★ Do not touc h any of the moving partsor press any objects against themachine wh ile sewing. as this ma yresult in p ers onal injury or dama ge tothe machine.- 4 -★ Wait at least 5 minutes after turning off the power switch and disconnecting the powercord from the wall outlet before opening the face plate of the control box. Touchingareas where high voltages art present can result in severe injury.ꍾ Notes on safety