Uniden BC-880FM Owner's Manual

12clockwise to move to the previous channel. The radio continuesscanning in the selected direction.• To change to Memory Channel Scan mode, press MEM/SCANwhile in All Channel Scan mode (see page 13).3. To exit All Channel Scan mode, press PTT, 9/19/NORM, WEATHER,or CB/PA.WEATHER MODE (WX MODE)Your radio combines a CB radio with a Weather radio and a Weather Alertsystem. The Weather Alert system sounds a seven-second signal in theevent of severe weather when you are in CB mode. The Weather radiocontinually broadcasts weather conditions when you are in Weathermode.1. Press WEATHER. Your radio is now in Weather radio mode.2. Select 1 of 7 weather channels using Channel Selector.You cannot change ANL, NB, or AM/FM settings while in WX mode. The radio willsound an alert tone.Set Weather Scan ModeWeather Scan mode allows the radio to move to the next weatherchannel if no signal is detected after 3 seconds. Set Weather Scan modeto ON or OFF through the menus.1. Press MENU/OK to activate the menus. COLOR displays.2. Turn the Channel Selector knob to cycle through the menuoptions until WXSCAN displays.3. Press MENU/OK. ON displays.4. Press MENU/OK to set Weather Scan mode to ON or turn theselection knob until OFF displays and then press MENU/OK to setit. WXSCAN displays again.If Weather Scan is ON when you turn off the radio, it remains ON.Left at these setting (WX mode, WX Scan), you will hear onlyweather broadcasts and Weather Alert signals. To use your CB radionormally while monitoring weather alerts, press WEATHER again.