                                        | |
Contents
| 
UNIDEN Model uh015sx UHF CB RadioOperation11Operating the uh015sx in Duplex ModeFor this example we are adopting CH01 as the channel being used in your area forrepeater use.To Set Duplex ON/OFFPress once. The DUP settingwill flash. Turn the rotary knob to adjustthe setting to or . Press & hold/ENTER to set. A confirmationtone sounds.The DUP icon appears.! Only channels 01 - 08 are available for Duplex.! Check with your local Retailer for information on available repeaters.! If a button is not pressed within 10 seconds the uh015sx will automatically exit MENU Mode.ScanningThe uh015sx scanning feature allows you to search the SCAN MEMORY for activechannels automatically.The scan memory has two main groups; Open Scan (OS) and Group Scan (GS), OSScan searches all the channels and frequencies in its memory continuously. GS Scanhas the ability of monitoring a priority channel every 1.5 seconds while searchingchannels and frequencies in its memory.Furthermore, while scanning you can select which channel groups to activate (CB orPOLICE).Press and Scanning starts.The SCN icon appears.You may change the scan direction byturning the rotary channel selector.Press again to exit scanning.Open Scan (OS) ModeAllows continuous scanning of channels stored in the Open Scan memory. If an activechannel is found, scanning will stop on that channel.This example shows CH17 active.If the received signal ceases, the unit will wait 3seconds for the signal to return, otherwise scanningresumes. During Scan you may...!Press to hold scan. Press again to resume scan.!If scan stops on a frequency and you wish to continue then turn rotary channelselector.!The direction of scan can be changed using the rotary channel selector.!To remove an active channel from scan memory press and hold /MEM andscan resumes.!Press and hold /OS/GS for 2 seconds to switch between GS and OS modes.To deactivate scan, press momentarily.! When Scan is deactivated the starting channel will be reinstated.! If scan is deactivated while on hold the hold channel will be reinstated.! OS Mode is indicated by the absence of the GS icon.SCANOS/GSSRCHBAND/TSQMONSQLHOLDDCS/CTCSSPOLMEMMENUENTERSCANOS/GSSRCHBAND/TSQMONSQLHOLDDCS/CTCSSPOLMEMPOLMENUMENUHOLD HOLD |
Related manuals for Uniden UH015sx
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine